Advertisement
12 x Short Bolts
16 x Washers
(H8)
(H7)
1 x Allen Key
4 x Long Bolts
(H9)
(H6)
2 x Felt Pads
4 x Levelling Feet
(H13)
(H10)
6 x Dowels
6 x Cam Bolts
(H1)
Phillips Head
Screwdriver
Insert 6 x Dowels (H3) into Bottom Panel (P2).
Secure 6 x Cam Bolts (H1) into Bottom Panel (P2),
tightening using a Phillips Head Screwdriver.
H10
P15
P14
P14
Stick 2 x Felt Pads (H13) to the centre of Support Rails (P15)
Align and position 4 x Legs (P14) with the pre-drilled holes on the Bottom Panel (P2).
Align and position the 2 x
Ensuring the side with the Felt Pads (H13) is on the Bottom Panel(P2)
Using 3 x Washers (H7) and 3 x Short Bolts (H8), secure 1 x Leg (P14) to the Bottom
Panel (P2), tightening using the Allen Key (H9).
Secure the
Support Rails (P15)
Washer (H7) and 1 x Long Bolt (H6), tightening using the Allen Key(H9).
Repeat this step for the other 3 x Legs (P14).
(H3)
(P2)
H9
H6
H7
P14
H9
H8
H6
H7
H7
H13
H13
P15
(P15) between the Legs (P14) as shown.
Support Rails
to the Leg (P14) and Bottom Panel (P2) using 1 x
H9
P14
H8
H7
Advertisement
