Advertisement
13
6 x Cam Nuts
Phillips Head
(H2)
Screwdriver
Insert 6 x Cam Nuts(H2) into Panel(P3&P4&P5) as shown.
Rotate the cam nuts so the arrows point towards the incoming cam bolts.
With assistance, attach the Bottom panel (P2) to the assembled frame (P3, P4, P5)
as shown. Attach together by tightening the Cam Nuts (H2) on the assembled
frame (P3, P4, P5) by turning clockwise using the Phillips Head Screwdriver.
14
6 x Hinges
12 x Short Screws
(H4)
(H5)
Attach 2 x hinges (H4) to 1 x right door (P13) using 4 x short screws (H5)
as shown. Tighten using a phillips head screwdriver.
Repeat this step for the other right door (P13) and the left door (P12).
(P2)
(P5)
(P3)
(P4)
Page 11
Advertisement
