Advertisement
11
6 x Cam Nuts
Phillips Head
(H2)
Screwdriver
Insert 6 x Cam Nuts(H2) into Panel(P3&P4&P5) as shown.Rotate the
cam nuts so the arrows point towards the incoming cam bolts.
With assistance, attach the Top Panel (P1) to the assembled frame (P3, P4, P5)
as shown. Attach together by tightening the Cam Nuts (H2)
on the assembled frame (P3, P4, P5) by turning clockwise using the Phillips
Head Screwdriver.
12
With assistance, carefully turn the assembled frame over.
Slide the other Long Back Panel (P10) through the grooves on the Middle Panel (P5)
and Left Panel (P4). Slide the Short Back Panel (P11) through the grooves
on the Middle Panel (P5) and Right Panel (P3).
(P11)
(P10)
Page 10
Advertisement
