What you need to install InfiniBand
Make sure you have a small flat screwdriver before you install your InfiniBand card.
Installing InfiniBand
To install an InfiniBand option, do the following:
48
BladeCenter QS20 Type 0200: Problem Determination and Service Guide
Table 13. InfiniBand package contents (continued)
Description
1 x blade bezel
4 x screws
1 x gasket
1. Shut down the BladeCenter QS20.
2. Remove the BladeCenter QS20 from BladeCenter.
3. Open the top cover.
4. Unlatch the front bezel and partially remove it from the metal guides.
5. Unplug the control panel and serial cable connectors from the blade's board as
shown in Figure 10 on page 49.
What the item looks like