Table of Contents
Advertisement
4.1.3 Profile Chart
A profile chart can show a single or multiple
parameters plotted against depth/pressure.
Depth/Pressure is always on a reversed Y
axis.
4.1.4 Scatter Chart
A scatter chart allows one
parameter to be plotted against
another. A good example of this is
T-S plot traditionally used in
oceanography to identify water
masses.
Temperature is show here on the
Y axis with Salinity plotted on the
X axis.
4.1.5 Polar Chart
Polar Charts can be used to display vector type data with a magnitude + direction. eg. water
current direction and speed or wind speed and direction.
Page | 17
DataLog x2 and Terminal x2 Installation and User Guide
MANUAL-1899207337-17
© 2021 – Valeport Ltd
Advertisement
Table of Contents
