Motorola MC145192EVK Manual page 32

[W] Change default low frequency
This command prompts the user (screen #5) to input a decimal value in MHz for the default low frequen-
cy. The program default low value is displayed along with the current value. The user may leave the low
frequency value as is by entering return without a value. The program low default value is dependent on
the targeted board type (see Table 2).
This value is not sent to the board immediately. It is the value that is sent to the board when the [L] com-
mand is executed.
Board Type
MC145190
MC145191
MC145192
MC145200
MC145201
MC145202
MC145220 in Single Loop Mode
MC145220 in Dual Loop Mode
[Y] Change default medium frequency
This command prompts the user (screen #5) to input a decimal value in MHz for the default medium
frequency. The program default medium value is displayed along with the current value. The user may
leave the medium frequency value as is by entering return without a value. The program medium default
value is dependent on the targeted board type (see Table 3).
This value is not sent to the board at this time. It is the value that is sent to the board when the [M] com-
mand is executed.
Board Type
MC145190
MC145191
MC145192
MC145200
MC145201
MC145202
MC145220 in Single Loop Mode
MC145220 in Dual Loop Mode
MC145192EVK MC145202EVK
32
Table 2.
Program Default Low Frequency
1482 MHz
1466 MHz
1466 MHz
733 MHz (PLL)
790 MHz (PLL')
Table 3.
Program Default Medium Frequency
1492 MHz
1476 MHz
1476 MHz
738 MHz (PLL)
805 MHz (PLL')
741 MHz
733 MHz
733 MHz
45 MHz
746 MHz
738 MHz
738 MHz
60 MHz
MOTOROLA