Motorola MC145192EVK Manual page 19

Screen #7 After [N] Command Selected
This is the resulting screen that is displayed after the user selects the '[N] Change C register and Pres-
cale' command. The user is provided a submenu to select from. Each submenu option also shows a
submenu.
If [Q] command is selected, the user is returned to the main menu. See screen #2.
If [0] command is selected, the user is presented with screen #8.
If [1] command is selected, the user is presented with screen #9.
If [2] command is selected, the user is presented with screen #10.
If [3] command is selected, the user is presented with screen #11.
If [4] command is selected, the user is presented with screen #12.
If [5] command is selected, the user is presented with screen #13.
If [6] command is selected, the user is presented with screen #14.
Welcome to MC145xxx EVK Demonstration Program, rev 2.5
Available Boards – Current target board is: A, MC145190
Brd [A]!: MC145190
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Change C register:
[0] Output A – (Output A set to Port)
[1] Output B – (Out B)
[2] PDout Current – (PDout)
[3] Phase Detector Select – (PDA/B)
[4] Lock Detect Enable – (LDE)
[5] Phase Detector Polarity – (POL)
[6] Standby – (STBY)
Prescale:
[7] Prescale
[Q] to return to main menu
[X]! Terminate demonstration program. [?]! View help screen.
MOTOROLA
Change C Register
Brd [–]!: N/A Brd [–]!: N/A
MC145192EVK MC145202EVK
19