Table of Contents
Advertisement
Screen #2 'Select from the available options' (continued)
Available Boards – Current target board is: A, MC145190
Brd [A]!: MC145190
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
MC145xxx Frequency Commands – Current Output Frequency is 746 MHz
[L]! Set to low freq
[M]! Set to med. freq
[H]! Set to high freq.
[U]! Step frequency up by step size
[D]! Step frequency down by step size
MC145xxx Additional Commands
[E]
Set function of output A
[R]
Set crystal/reference mode – Current mode is Ref. mode, REFout low
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Initialization/System Setup Commands:
[P]
Set output port address – Current address is $278
[G]
Change board definitions
[I]
Initialize board(s), Write all registers
MC145192EVK MC145202EVK
14
Welcome to MC145xxx EVK Demonstration Program, rev 2.5
Select from the available options
Brd [–]!: N/A
741 MHz
746 MHz
751 MHz
[X]! Terminate demonstration program. [?]! View help screen.
Brd [–]!: N/A
[W] Change default low freq.
[Y] Change default med. freq.
[Z] Change default high freq.
[O] Set PLL output frequency
[F] Set REFin freq. & channel spacing
[N] Change C Register
MOTOROLA
Advertisement
Table of Contents
