Motorola MC145192EVK Manual page 24

Screen #11 After [N] & [3] Commands Selected
This is the resulting screen that is displayed after the user selects the '[N] Change C Register' and then
the '[3] Change Phase Detector Select' command. The user is provided a submenu to select from. This
submenu contains commands to toggle the phase detector setting.
The current phase detector setting is displayed as 'phi R & phi V' or 'PD out ', depending on the setting.
The user can select the [0] and [1] menu options to toggle the phase detector select setting.
If the [Q] command is selected, then the user is returned to the main menu. See screen #2.
Available Boards – Current target board is: A, MC145190
Brd [A]!: MC145190
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Change C Register, Phase Detector Select – Currently: PDout
[0]! phi R & phi V
[1]! PDout
[Q] to return to previous menu
[X]! Terminate demonstration program. [?]! View help screen.
MC145192EVK MC145202EVK
24
Welcome to MC145xxx EVK Demonstration Program, rev 2.5
Change C Register, Phase Detector Select
Brd [–]!: N/A Brd [–]!: N/A
MOTOROLA