• Loosen the appliance cover as described under
"Reversing the door opening"
the upper door hinge.
• Turn out the stand and disassemble the lower
door hinge.
• The respective hinge assembly is carried out in
reverse order.
• Open and close the appliance door for a test run,
readjust the hinges if necessary. In any case,
make sure that the door fits tightly and accurately.
Troubleshooting
Before you contact an authorized specialist
Problem / Cause / Action
Appliance is not working properly or at all
- Check the power supply / temperature setting /
ambient temperature.
- Unblock the ventilation openings, install the ap-
pliance freely.
Loading is too warm
- Check the temperature setting / ambient temper-
ature.
- A large quantity of warm food has been stored in
the unit in the last 24 hours.
- The appliance door is not closed properly, check
the door seal.
Loud noise during operation
- Check that the appliance is level.
"Operating noise"
- See
Water on the appliance bottom
- Check the temperature setting / water discharge
channel or opening.
Light does not work
- Check the power supply.
"Changing the light"
- See
NOTE:
If a problem persists after following the steps above,
contact your trader or an authorized technician.
and disassemble
.
.
Technical Data
Climate class SN/N/ST/T: this appliance is intended
to be used at ambient temperature ranging from
10°C to 43°C.
Electrical connection............................................
Power voltage: .........................220-240 V~ / 50 Hz
Rated (defrost) power: ..................................70 W
Rated current: ...............................................0.8 A
Dimension H x W x D / Weight...............................
Appliance size: .......................84.5 x 56.0 x 57.5 cm
Net weight: ..................................approx. 28.0 kg
For more information about the product, scan the QR
code on the supplied energy label and/or visit the of-
ficial website of the product data bank:
https://eprel.ec.europa.eu
The right to make technical and design modifications
during continuous product development remains re-
served.
This appliance has been tested according to all rele-
vant current CE guidelines, such as electromagnetic
compatibility and low voltage directives, and has
been constructed in accordance with the latest safety
regulations.
25