Description; Introduction - HMS Networks Intesis User Manual

Modbus Server – BACnet Client
TM
Intesis

Description

Introduction

This document describes the integration of BACnet MSTP and BACnet IP installations into Modbus RTU or Modbus
TCP compatible devices and systems using the Intesis Modbus Server – BACnet Client gateway.
The aim of this integration is to make accessible BACnet system signals and resources from a Modbus based control
system or device, as if it was a part of the own Modbus system and vice-versa.
The gateway acts as a Modbus TCP Server or Modbus RTU slave device in its Modbus interface, allowing a Modbus
master/client device to read/write to its internal points. From BACnet point of view, Intesis acts as a BACnet client
device, able to subscribe (COV) or do periodic polling of configured BACnet points.
Configuration is carried out using the configuration software Intesis
This document assumes that the user is familiar with Modbus and BACnet technologies and their technical terms.
into Modbus TCP or Modbus RTU control and monitoring systems
© HMS Industrial Networks S.L.U - All rights reserved
This information is subject to change without notice
Integration of BACnet IP or BACnet MSTP server systems
TM
MAPS.
User Manual r1.3 EN
URL https://www.intesis.com
5 / 27