Advertisement
Assembly Instructions
Steam Roller D375, D376, D377 & Traction Engine D415, D416, D417
Stage 5, Cylinder
Illustration 16
54
1 x cylinder cap
55
1 x cylinder complete
56
1 x seal diameter 5.5/2.5mm
57
1 x slide valve
4
3 x slot bolts M3x4mm
58
1 x cylinder cover
59
1 x collar screw M2
12
1 x hexagonal nut M2
Text & illustrations: Wilesco Wilhelm Schröder GmbH & Co., Germany
Illustration 17
Push the slide valve (57) into the cylinder (55).
Push on black cylinder casing (55) (nose
downwards). Place the slot bolts (4) through the
casing cap (54) fit seal (56) to inside of cap. Screw
on cap.
Illustration 18
Screw on cylinder with 2 screws (4) onto the
machine plate. Do not tighten as the steam pipe
must be inserted. Connect piston rod and piston
with the collar crew (59) and nut (12). Then connect
the slide rod to the slide valve with the slot bolt
(11).
Advertisement
