Advertisement
Assembly Instructions
Steam Roller D375, D376, D377 & Traction Engine D415, D416, D417
Stage 7, Burner and Connection with cap or front part
Illustration 24
76
1 x burner slide
77
1 x burner guide
78
1 x cap (only for traction engine)
79
1 x chimney shoulder screw
80
1 x gangway
5
1 x hexagonal nut M3
4
1 x slot bolt M3 x 4 mm
Illustration 26 ONLY FOR STEAM ROLLERS
The saddle from Stage 1 is now pushed onto the
boiler and secured with the chimney shoulder
screw (79). The gangway (80) is pushed into the
gangway bracket, and is secured on the right hand
side by means of a slot bolt (4) and nut (5).
Text & illustrations: Wilesco Wilhelm Schröder GmbH & Co., Germany
Assembly Instructions
Steam Roller D375, D376, D377 & Traction Engine D415, D416, D417
Stage 8, Steering
Illustration 25
The burner guide (77) is placed into the burner
chamber so that the four tabs pint downwards.
Apply pressure from the inside with the index
finger. Then bend the tabs over with a solid object
(hammer handle etc.). The burner (76) can now be
pushed in.
Illustration 26a ONLY FOR TRACTION ENGINES
Cap (78) is pushed onto the boiler and secured
with the chimney shoulder screw (79). The
gangway (80) is placed into the gangway bracket
and is secured on the right hand side by means of
the slot bolts (4) and nut (5).
Advertisement
