Advertisement
Illustration 38
Screw a nut (47) on the top of the roof support and
place the roof (97/104) on the top so that the front
protrudes forwards (traction engine only). Fit cap
crew (102) and tighten. Not too tight otherwise the
thread is damaged. Straighten out roof and tighten
all nuts.
Insert chimney (98/105) with fold pointing
backwards. Stick the sticker "OLD SMOKY" (99) to
the saddle cam of the steam roller.
CONGRATULATIONS, YOU HAVE FINISHED!
Text & illustrations: Wilesco Wilhelm Schröder GmbH & Co., Germany
Advertisement
