Pc Operation Through Dak Densimeter Data Analysis Software - DAK 900-EH Series Manual

PC Operation through Dak Densimeter Data Analysis Software

Dak has designed simple yet sophisticated software, which is easy to operate, interpret and print results.
Connections:
After switching on the Densimeter, Printer and the Computer/ Lap top.
Connect the Densimeter to the PC via the USB. Click on the Icon for the Densimeter software on your desktop, the
"Communication Status" on the software page should show the status as "Connected" like shown in the below
image.
Once the connection is established start measuring the Density as per the same process as mentioned above.
After every reading press "Enter" after which the reading appears in the PC software directly, with every click of
"Enter" key after the measurement the results will be automatically taken by the software.
The below image is the representation of the above steps:
Additional Provision:
As observed in the above image there is a option "Treatment" in the above software.
This option can be used when the user wants to treat the Test Sample that may alter its original form and understand
the effect of that treatment on the sample density.
Procedure for measurement remains the same:
Click on "Treatment" before you measure the density for the sample. Now follow the normal procedure of Density
measurement and click on "Enter" key. There will be a comparison of results for that sample, post and prior to
treatment. This gives you the effect of treatment on the sample by giving its Density.
__________________________________________________________________________________ 28