Liquid Sg Set Mode - DAK 900-EH Series Manual

4. Liquid SG Set Mode:

Importance: If the liquid used during testing is other than Water then you can set the specific gravity of the
liquid in use with this option. The Density for sample under test is calculated accordingly.
In this you can set the SG of the liquid in use.
Configuration Menu  Liquid SG Set Mode
Press "Tare + Key A" to enter the "Configuration Menu"
Go to the Liquid SG by using keys "A" or "B" till you reach this Option
Press "Enter"
Set the required SG value in this option by using keys "A" or "B" to change the numerical values, after setting these
values press "Enter" to continue.
__________________________________________________________________________________ 19