Table of Contents
Advertisement
2. Comparator Set:
Importance: This function enables to the user to set limits for the readings of that particular batch of samples. Once
he enters the upper and the lower limits, a range has been defined for the reading, if this crosses the upper side then
there will be and indication of "HI" and if on the lower side then it will show "LOW" and an "OK" if the result falls
in the defined range, this gives the user ready to use interpretation and a remark which can be printed and saved for
future reference.
Configuration Menu Comparator Set
- Press Tare and Key A till you enter the Configuration Menu.
- Press Key A to reach the "Comparator Set" option
- Set the Comparator "Hi" value by using the Keys A or B to change the numerical value accordingly, press
"Enter" after the "Hi" value is set.
- Now set the Comparator "Lo" value by using the same keys as above and press "Enter" after setting the value.
- In every mode, if Comparator is "ON", then HI / OK / LO indication will be displayed after every measurement
result and same status is sent to printer.
3. Temperature Compensate:
Importance: When the liquid used for measurement is at a sub-normal temperature then this feature enables the
user to enter this Temperature for the liquid so that the density measurement is calculated compensating this
difference in temperature.
Configuration Menu Temperature Compensate
Press "Tare + Key A" to enter the "Configuration Menu"
Go to "Temperature Compensate" by using keys "A" or "B" till you reach this Option.
There are two options here Temperature compensate for:
-Water
-Any other liquid as per the user
For Water:
After entering the Temperature Compensate mode, click "Enter" on Water
Enter the values in "Water Actual Temperature" by using keys "A" or "B" and press "ENTER"
Enter the values in "Water Compensate Temperature" by using keys "A" or "B" and press "ENTER"
For any other Liquid:
After entering the Temperature Compensate mode, click "Enter" on Liquid Temperature Compensation
Enter the values in "Liquid Actual Temperature" by using keys "A" or "B" and press "ENTER"
Enter the values in "Liquid Compensate Temperature" by using keys "A" or "B" and press "ENTER"
__________________________________________________________________________________
18
Advertisement
Table of Contents
