Table of Contents
Advertisement
LEAD ZERO BLANK
Importance: This option is mainly for users who want the reading up to 3 digits before the decimal point.
E.g. Reading for the sample is 3gms
a) If Lead Zero Blank is "Disabled" then the reading would be displayed as 003.00g
b) If Lead Zero Blank is "Enabled" then the reading would be displayed as 3.00g
- After entering the Gen Set Menu
- Select "LEAD ZERO BLANK"
- Press "Enter"
- Select "DISABLE or ENABLE" by using keys "A" or "B"
- Press "Enter" to confirm
BACKLIGHT LIGHT OPTION
Importance: This option is for timing of the display back light. Depending on the requirement you can select the
display light mode from 2 to10 seconds or keep it "Off"/ "On" continuously.
- After entering the Gen Set Menu
- Select "BACKLIGHT LIGHT OPTION"
- Press "Enter"
- Select out of the following options: 2 sec/ 4 sec/ 6sec/ 8sec/ 10sec/Continuous On/OFF
The options can be viewed by pressing the key "A" until you reach the required field and Press "Enter" for
confirming the same.
__________________________________________________________________________________
12
Advertisement
Table of Contents
