Table of Contents
Advertisement
AUTO POWER OFF
Importance: This is a power saving option. On enabling Auto Power Off the equipment switches off
automatically if it remains un-operated for 30mins.
- After entering the Gen Set Menu
- Select "AUTO POWER OFF"
- Press "Enter"
- Select "DISABLE or ENABLE" by using keys "A" or "B"
- Press "Enter" to confirm
PRINTING MODE
Importance: This is the print option in which the user can print results by using any of the 3 options:
a) Auto-
Here every result is printed immediately after the test.
b) Manual - Only those results which are required are printed,
Procedure: Activate Manual Print
Conduct the test
If you wish to print this result, go to "Gen Settings", go to "Re-print result"
Press "Enter" and the last result obtained will be printed.
c) Off-
No printing will issued.
How to go to the above option:
- After entering the Gen Set Menu
- Select "PRINTING MODE"
- Press "Enter"
- Select out of the following options: (Off / Auto / Manual)
The options can be viewed by pressing the key "A" until you reach the required field and Press "Enter" for
confirming the same.
__________________________________________________________________________________
14
Advertisement
Table of Contents
