Table of Contents
Advertisement
PRINT BAUD RATE
Importance: For operating the Printer the user needs to configure the Densimeter with a Baud rate required for
Printer operation.
- After entering the Gen Set Menu
- Select "PRINTING MODE"
- Press "Enter"
- Select out of the following options: (9600 / 19200)
The options can be viewed by pressing the key "A" until you reach the required field and Press "Enter" for
confirming the same.
DEVICE ID
Importance: In case the user has more than one Densimeters we have a provision for a Device ID, where you can
enter an Id up to 3 digits as per your requirement.
- After entering the Gen. Set Menu
- Select "DEVICE ID"
- Press "Enter"
- 001 will be the default id, you can change by using keys "A" or "B" to Increase or Decrease the number
respectively and the "Tare" key can be used to shift the digit place from first to second and so forth
E.g. 001 press Tare once to shift the cursor to the right 001
__________________________________________________________________________________
15
Advertisement
Table of Contents
