Subaru Ascent 2023 Manual page 156

152
Rear gate
hazard warning flashers will flash twice.
If you press the power rear gate button
again, the rear gate will close.
You can open the rear gate by pressing the
power rear gate button briefly while the
rear gate is being closed.
NOTE
The rear gate cannot be paused when it
is in the approximately 2 in (5 cm) range
from the fully closed position. The
system will ignore any button operation
and the rear gate will continue to open.
To close the rear gate:
Press and hold the power rear gate button.
Then an electronic chirp will sound twice
and the hazard warning flashers will flash
twice. If you briefly press the power rear
gate button again, the rear gate will open.
NOTE
The factory setting (default setting) of
the operation for the "
the access key fob is pressing and
holding. This setting can be changed to
non-operation or pressing twice at
SUBARU dealers. For more details,
contact your SUBARU dealer.
! By the buttons on the rear gate
NOTE
After performing the following proce-
dures, an electronic chirp will sound
twice and the hazard warning flashers
will flash twice.
Rear gate opener button
" button on
Power rear gate button on the inside edge
of the rear gate
1 Power rear gate button
2 Power rear gate lock button
To open the rear gate:
1. For models with "keyless access with
push-button start system", carry the
access key fob. For models without
"keyless access with push-button start
system", unlock the rear gate.
2. Briefly press the rear gate opener
button when the rear gate is closed.
The rear gate will open automatically.