Subaru Ascent 2023 Manual page 275

. The factory setting (default setting)
for this function is set as the front
passenger's side mirror. The setting
of driver's side mirror operation can
be changed by a SUBARU dealer.
Contact your SUBARU dealer for
details.
CAUTION
Depress the brake pedal during the
reverse tilt-down mirror angle ad-
justment.
To adjust the reverse tilt-down mirror
angle, adjust the outside mirror using the
remote control mirror switch while the
reverse tilt-down operates. For details
about how to adjust the outside mirror
angle, refer to "Remote control mirror
switch" �P270.
Memory function:
The angle of the reverse tilt-down mirror
can be registered. Register the position
with button "1", "2" or each of the access
key fobs and retrieve the position.
For details about registration or retrieval of
a position, refer to "Power driver's seat
with synchronized outside mirrors memory
function" �P35.
NOTE
If the seat is moved forward or back-
ward 1.18 in (30 mm) or more, the
reverse tilt-down will move to the
factory default position or the last
position hold.
Hold last position function:
The angle of the reverse tilt-down mirror
can be set to the latest adjusted angle.
The hold last position function operates
when the following condition are met.
. The memory function is not used.
. The seat is moved forward or backward
1.18 in (30 mm) or more.
NOTE
. The factory setting (default setting)
for this function is set as "non-
operational". This setting can be
c h a n g e d t o " o p e r a t i o n a l " a t
SUBARU dealers. For more details,
contact a SUBARU dealer.
. If the hold last position function
setting is "non-operation", the re-
verse tilt-down will move to the
factory default position.
Mirrors
! Power folding mirror switch (if
equipped)
The power folding mirror switch operates
only when the ignition switch is in the "ON"
or "ACC" position.
To fold the outside mirrors, press the
power folding mirror switch. To unfold the
mirrors, press the switch again.
NOTE
. If the outside mirrors have been
operated (folded or unfolded) manu-
ally, when you turn the ignition
switch from the "LOCK/OFF" posi-
tion to the "ACC" or "ON" position,
the outside mirrors may be adjusted
automatically depending on the sta-
tus of the power folding mirror
switch.
– CONTINUED –
271