Table of Contents
Advertisement
4
Digital speed screen (Refer to "Basic
screens" �P198.)
5
Telltale screen (Refer to "Telltale screen"
�P197.)
6
Select lever/gear position indicator (Re-
fer to "Select lever/gear position indica-
tor" �P191.)
7
X-MODE indicator (Refer to "X-MODE
indicator" �P192.)
8
O d o m e t e r ( R e f e r t o " O d o m e t e r "
�P169.)/Double trip meter (Refer to
"Double trip meter" �P169.)
A:
Activating the EyeSight system
B:
Deactivating the EyeSight system
& Basic operation
Control switches
1
2
3
By operating
or
of the control
switches, the screens can be changed.
If there are some useful messages, such
as vehicle information, warning informa-
tion, etc., they will interrupt the current
screen, and appear on the display accom-
panied by a beep. If such a screen is
displayed, take proper action according to
the message shown on the screen.
The warning screen will return to the
original screen after a few seconds. While
the
information reminder is shown on
the display, it may be possible to display
the warning screen again. To recall the
message marked with
on the display,
press the
switch on the steering wheel.
& Welcome screen (opening
animation) and Good-bye
screen (ending animation)
When the driver's door is opened and
closed after unlocking the door, the wel-
come screen (opening animation) will
appear on the combination meter display
for approximately 20 seconds.
When the ignition switch is turned to the
"LOCK"/"OFF" position, the combination
meter display gradually turns off by show-
ing Good-bye screen (ending animation).
Combination meter display (color LCD)
NOTE
. The welcome screen and the good-
bye screen may differ in the actual
words and appearance.
. The basic screen will be shown
when the ignition switch is turned
to the "ON" position while the wel-
come screen is displayed.
. Once the welcome screen appears, it
takes a certain period of time to
display it again.
. If the ignition switch is operated
after unlocking the driver's door,
the welcome screen will not appear
even when the driver's door is
opened and closed.
. The welcome screen will disappear
when you lock the driver's door by
using the remote keyless entry sys-
tem (all models) or the keyless
access function (if equipped) while
the welcome screen is displayed.
. The welcome screen including the
audio/navigation unit can be set to
on or off.
. The welcome screen and the good-
bye screen can be set to on or off.
For details, refer to "General set-
tings" �P210.
195
– CONTINUED –
Advertisement
Chapters
Table of Contents
