Subaru Ascent 2023 Manual page 64

60
Seatbelts
3. Insert the tongue plate into the buckle
and position the seatbelt comfortably.
! Unfastening the seatbelt
1 Button
1. Push the release button of the center
seatbelt buckle (on the left-hand side)
to unfasten the seatbelt.
NOTE
When the seatback is folded down, it is
necessary to disconnect the connector.
2. Insert a tongue plate or another hard
pointed object into the slot in the
anchor buckle on the right-hand side
and push it in. The anchor tongue plate
will then disconnect from the buckle.
3. With the belt held by hand, allow the
retractor to roll up the belt slowly. You
should hold the webbing end and guide
it back into the retractor while it is
rolling up. Neatly store the tongue plate
in the recess on the ceiling and then
insert the tongue plate and anchor
tongue plate into the slot as shown in
the illustration.