Table of Contents
Advertisement
Intel® RAID Adapters RSP3TD160, RSP3MD088, RSP3DD080 and RSP3WD080 Hardware User Guide
2.4.7
Drive Migration
The Intel® Tri-Mode RAID adapters allow to move one VD from one adapter to another, this is called Drive
Migration. In other words, Drive Migration is the transfer of a set of drives in an existing configuration from one
adapter to another. In order to achieve this, there are some conditions: 1) The drives must remain on the same
channel. 2) The drives must be reinstalled in the same order as in the original configuration. 3) The adapter to
which the drives are migrated cannot have an existing configuration.
Note: When drives are migrated, move only the drives that make up the virtual drive (not all of the drives in a
drive group), so that an NVRAM mismatch error does not occur (provided a configuration is on the destination
adapter). The NVRAM mismatch error appears only when all of the drives are moved to the other adapter.
Note: Drive roaming and drive migration cannot be supported at the same time.
More information on how to use the drive migration feature can be found on the Intel® RAID Software User
Guide for full featured and entry level RAID adapters.
2.4.8
Safety Characteristics
All the Intel® Tri-Mode RAID adapters meet or exceed the requirements of UL flammability rating 94 V0. Each
bare board is also marked with the supplier name or trademark, type, and UL flammability rating.
10
Advertisement
Table of Contents
