Hitachi GR4000 Series Quick Start Manual page 55

(3) Check the operation status of interfaces.
You can check detail information related to the condition of each interface.
show ip interface
GR1>
eth04: flags=80e3<UP,BROADCAST,NOTRAILERS,RUNNING,NOARP,MULTICAST>
mtu 1500
inet 10.0.0.2/24 broadcast 10.0.0.255
inet 172.18.4.1/24 broadcast 172.18.4.255
NIF0/Line4: UP media 10BASE-T half(auto) 00:00:87:d0:e7:f4
Time-since-last-status-change: 03:58:59
Last down at: 09/02 19:42:32
eth05: flags=80e3<UP,BROADCAST,NOTRAILERS,RUNNING,NOARP,MULTICAST>
mtu 1500
inet 15.0.0.2/24 broadcast 15.0.0.255
NIF0/Line5: UP media 100BASE-TX full(aut＋o) 00:00:87:d0:e7:f5
Time-since-last-status-change: 01:38:29
Last down at: 09/02 19:11:10
TUNNEL64: flags=80b1<UP,POINTtoPOINT,NOTRAILERS,NOARP,MULTICAST>
mtu 1280
inet 192.168.100.1/24 --> 192.168.100.2
physical address inet6 3ffe:1234:5678:9abc::64 --> fec0:1234:5678:9abc::64
Time-since-last-status-change: 03:58:59
Last down at: 09/02 19:51:02
TUN6to4: flags=80b1<UP,POINTtoPOINT,NOTRAILERS,NOARP,MULTICAST>
mtu 1280
inet6 2002:6464:6464:1::1/64
Time-since-last-status-change: 00:00:15
Last down at: 09/02 19:25:00
GR1>
QSGGR4K00-10 5794047-1X
GR4000 Quick Start Guide, Revision 1 - Preliminary
...The operation status of each interface will be shown.
39