Hitachi GR4000 Series Quick Start Manual page 49

(3) Check configuration information you input.
In order to check configuration information you input, display its contents on the screen.
(If you have information to be shown over several pages, only the first page will be shown. In such a case, you can trun the
pages by entering the [space] key.)
show
!GR1(config)#
#startup configuration file
!
system name "GR1"
!
line ethernet0/0 ethernet 0/0
ip 192.168.1.1/24
!
line ethernet1/0 10gigabit_ethernet 1/0
ip 192.168.2.1/24
!
rip yes
interface 192.168.1.1
interface 192.168.2.1
!
snmp "NETWORK-A" 192.168.1.2
!
!GR1(config)#
(4) Save configuration information.
Save the configuration information you input into a file.
!GR1(config)# save
GR1(config)#
NOTE Configuration information will be saved into a file currently opened if you skip inputting a file
name. In the example above, information will be saved into an active file on memory. You can
save configuration information into a spare file you designated by inputting its file name after the
"save" command. For details about a spare configuration information file, see the GR4000
Software Manual Configuration Settings CLI-CLI Type 1 Hierarchical Input Format-.
NOTE The mark "!" at the beginning of a prompt can be deleted by saving configuration information.
QSGGR4K00-10 5794047-1X
GR4000 Quick Start Guide, Revision 1 - Preliminary
...Display the contents of information you input.
Configuration information displayed.
...Save configuration information.
33