Hitachi GR4000 Series Quick Start Manual page 28

GR4000 Quick Start Guide, Revision 1 - Preliminary
NOTE Use a standard type of memory card provided by HITACHI. The operation cannot be guaranteed if
a memory card other than that is used.
When installing a memory card using an option license for GR4000, make sure that the
manufacturing number of a device put on the label of a memory card matches the serial number
of an option license. (You can check these numbers using a packing list provided with GR4000.)
3.
Procedure
Connect a setup terminal to GR4000-160E1.
1．
Connect a setup terminal to the CONSOLE port of BCU (BCU0) using a RS－232C cross cable.
2．
Start up a setup terminal.
3． Start up communication software
NOTE GR4000-160E1 is pre-configured in a way that a setup terminal can be connected to a
CONSOLE port of BCU0 when it is shipped from the factory. Connect a setup terminal to a
CONSOLE port of BCU0 in case that a basic control unit is redundant.
NOTE As for the setup of communication software, see the communication software manual.
4.
Procedure
Attach an interface cable.
Attach an interface cable to an interface port
12
QSGGR4K00-10 5794047-1X