Table of Contents
Advertisement
28/64
Assembly
Bosch Rexroth AG, ROTATRAC eGFT 8000 general operating instructions series 10, RE 79088-01-B/02.2019
7.3 Installation position
The installation position of the planetary gearbox is horizontal.
The planetary gearbox installation position approved and recommended by
Rexroth is indicated on the dimensioned drawing in appendix D "Technical data /
Drawings" of the material number-specific operating instructions.
Installation of the planetary gearbox in a non-approved Rexroth mounting
position!
Damage or failure of the planetary gearbox and expiry of the warranty!
Only install the planetary gearbox in an approved Rexroth mounting position as
indicated in the dimensioned drawing in appendix D "Technical data / Drawings"
of the material number-specific operating instructions.
Damage to the planetary gearbox through misalignment with the machine frame!
Property damage!
Do not tilt the planetary gearbox during installation and insert it into the
machine frame torsion-free and tension-free.
Avoid misalignment of the planetary gearbox during installation.
Align the gearbox exactly with the machine or chassis frame.
7.4 Required tools
The planetary gearbox can be assembled with standard tools. No special tool is
required.
NOTE
Advertisement
Table of Contents
