Product And Technology-Dependent Safety Instructions - Bosch Rexroth MOBILEX GFT-W 30 Series Operating Instructions Manual

Winch drives for mobile and stationary applications
Table of Contents

Advertisement

12/86
Safety instructions
Bosch Rexroth AG
, MOBILEX GFT-W general operating instructions series 30, RE 79100-01-B/11.2020

2.6 Product and technology-dependent safety instructions

The following safety instructions apply to chapters 6 to 14.
Risk when transporting persons with the winch drive!
Mortal danger, risk of severe injury or damage to property in case of non-
observance!
Transporting persons with the winch drive is not allowed by the manufacturer,
Bosch Rexroth AG.
Danger during all works on the MOBILEX GFT-W planetary gearbox during the
operation of the crane or the winch application!
Mortal danger, risk of severe injury or damage to property during working!
Secure the entire unit against restarting.
Relieve any system pressure in the relevant part of the crane or winch
application before you start working on the planetary gearbox.
Switch the relevant part of the crane or winch application free of voltage
before you start working on the planetary gearbox.
Do not loosen any cable connections, connections or components on the
planetary gearbox, as long as the planetary gearbox or the crane, the winch
application part is under oil pressure and under voltage.
Fire hazard caused by fire, smoking and naked light!
Risk of injury or damage to property from combustible materials, as for example:
Lubricating oil, preserving agent, solvent, detergents and hydraulic fluid!
In dealing with combustible materials, please observe the product data sheets
and safety data sheets of the respective manufacturer.
Do not use fire or naked light when working on the planetary gearbox, its
mounting parts and when handling with combustible materials.
Do not smoke in the vicinity of combustible materials.
Always wear the protective equipment which is specified in the safety data
sheets of the respective substance.
When the planetary gearbox is positioned near ignition sources or heat
radiators, a shield must be installed so that leaking hydraulic fluid cannot
ignite and hoses are protected against premature aging.
WARNING

Advertisement

Table of Contents
loading

Table of Contents