General Information Concerning Damage To Property And Product Damages - Bosch Rexroth MOBILEX GFT-W 30 Series Operating Instructions Manual

Winch drives for mobile and stationary applications
Table of Contents

Advertisement

16/86

General information concerning damage to property and product damages

Bosch Rexroth AG
, MOBILEX GFT-W general operating instructions series 30, RE 79100-01-B/11.2020
3 General information concerning damage
to property and product damages
The following instructions apply to chapters 6 to 14.
Danger caused by improper handling!
The planetary gearbox can be damaged!
Do not submit the planetary gearbox to mechanical load in an unacceptable
way.
Do not place any objects on the product.
Do not hit against sensitive mounting parts (e.g. sensors or valves).
Do not hit against sealing surfaces (e.g. on the axial-piston motor working
connections (if included in the scope of supply)).
Leave the protective cover on the axial-piston motor (if included in the scope
of supply) until just before connecting the cables.
Damage of the planetary gearbox caused by a lack of knowledge when handling
the crane and the slinging equipment!
Lack of knowledge when handling a crane, or wrong means of attachment, may
lead to uncontrolled movements of the planetary gearbox and therefore damage
the crane or winch application!
Use a crane with sufficient lifting capacity for lifting the planetary gearbox.
Only use approved transport equipment.
Use e.g. eye bolts, straps, chains, swivel hooks, shackles or suitable
equipment as slinging equipment.
Damage caused by improper assembly!
Improper assembly of the planetary gearbox may lead to damage of the crane or
winch application!
Make sure that the planetary gearbox has been properly mounted by qualified
personnel before operating it.
Damage to the planetary gearbox caused by improper installation!
Material damage to the planetary gearbox or its mounting parts!
Assign or close all necessary connections properly, particularly the one of the
static multiple-disk brake.
Only commission a completely installed planetary gearbox.
Take the required connections from the dimensioned drawing in appendix
D "Technical data / Drawings" of the material number-specific operating
instructions.
NOTE

Advertisement

Table of Contents
loading

Table of Contents