Servicing And Repair; Cleaning And Care - Bosch Rexroth MOBILEX GFT-W 30 Series Operating Instructions Manual

Winch drives for mobile and stationary applications
Table of Contents

Advertisement

58/86

Servicing and repair

Bosch Rexroth AG
, MOBILEX GFT-W general operating instructions series 30, RE 79100-01-B/11.2020
10 Servicing and repair
Unpunctual inspection and maintenance work!
Property damage!
Perform the required inspection and maintenance work at the intervals
described in these instructions.
Regular care, maintenance and inspection extend the service life of the planetary
gearbox.
During warranty, repair work on the MOBILEX GFT-W planetary gearbox should
only be performed by the Rexroth Service. The warranty expires if the product is
opened, modified or changed during warranty.
Take the crane or winch application out of service for all inspection,
maintenance and repair works.
Allow the planetary gearbox cool down to approx. 50°C before touching it.

10.1 Cleaning and care

Penetrating dirt and liquids!
Damage to the planetary gearbox!
Extreme cleanness is required when working on the planetary gearbox.
Do not use a high-pressure cleaner for the cleaning of the planetary gearbox.
Seal all openings with suitable protective caps and/or protection devices, so
that no detergents can penetrate into the system.
Check all seals and plug-in connector covers for tight fit to make sure that no
humidity can enter the planetary gearbox during cleaning.
Remove coarse dirt on the outside and keep sensitive and important
components such as valves clean.
Damage to the seals!
Damage to the seals by aggressive detergent or solvent!
Do not use any aggressive detergents or solvents.
Use a dry cloth made of lint-free fabric to clean the planetary gearbox.
NOTE
NOTE

Advertisement

Table of Contents
loading

Table of Contents