General Information Concerning Damage To Property And Product Damages - Bosch REXROTH HYDROTRAC GFT 8000 Operating Instructions Manual

General information concerning damage to property and product damages

3 General information concerning damage
to property and product damages
The following instructions apply to chapters 6 to 14.
Danger caused by improper handling!
The planetary gearbox can be damaged!
Do not submit the planetary gearbox to mechanical load in an unacceptable

way.
Do not place any objects on the product.

 Do not hit against sensitive mounting parts (e.g. sensors or valves).
Do not hit against sealing surfaces (e.g. on the axial piston motor working

connections (if included in the scope of supply)).
Leave the protective cover on the axial piston motor (if included in the scope

of supply) until just before connecting the cables.
Damage of the planetary gearbox caused by a lack of knowledge when handling
the crane and the slinging equipment!
Lack of knowledge when handling a crane, or wrong slinging equipment, may lead
to uncontrolled movements of the planetary gearbox and therefore damage the
machine or vehicle!
Use a crane with sufficient lifting capacity for lifting the planetary gearbox.

Only use approved transport equipment.

Use e.g. eye bolts, straps, chains, swivel hooks, shackles or suitable

equipment as slinging equipment.
Damage caused by improper assembly!
Improper assembly may lead to damage of the planetary gearbox respectively the
machine or vehicle!
Make sure that the planetary gearbox has been properly mounted by qualified

personnel before operating it.
Damage to the planetary gearbox caused by improper installation!
Material damage to the planetary gearbox or its mounting parts!
Assign or close all necessary connections properly, particularly the one of the

static multiple-disk brake.
Only commission a completely installed product.

Take the required connections from the dimensioned drawing in appendix

D "Technical data / Drawings" of the material number-specific operating
instructions.
RE 79022-01-B/04.2020, General Operating Instructions HYDROTRAC GFT 8000 series 40, Bosch Rexroth AG
NOTE
15/70