Table of Contents
Advertisement
3 Using Your USB Printer On The Network
Overview
In this section, you will learn how to use your USB printer(s) via the Keyspan 4-Port Print Server.
You will learn to:
• connect your USB printer (hardware) to the Keyspan 4-Port Print Server's USB
port
• virtually connect to your USB printer using the Keyspan Server Utility software
• use your USB printer via the Keyspan 4-Port Print Server
Tech Note: These instructions are intended to help you connect a USB printer to the
4-Port Print Server for the very first time. It is highly recommended that you
only connect one USB printer at this time. To connect additional devices, repeat these
instructions for each device.
Using Your First USB Device
Step 1
-
Connecting Your USB Device To The 4-Port Print Server
Before using the Keyspan 4-Port Print Server, connect your USB printer to any USB port on the
Keyspan 4-Port Print Server.
Tech Note: USB Lights: Above each USB port is a green LED light (for a total of 4
lights). These lights indicate whether or not your USB printer is supported in the
current software/firmware. If your printer is supported, you will have a solid green light.
If you have a slow blinking light, your USB printer is not currently supported or you
have connected a USB device that is not a printer/multifunction printer. Please
contact Keyspan if you have a slow blinking light when you connect a
printer/multifunction printer.
This User Manual applies to the Keyspan 4-Port Print Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:4-Port Print Server - User Manual
• using the Connect and Disconnect buttons
• using the Auto-Connect Feature for Printers on Windows
• using the Auto-Connect Feature for Printers on Mac OS X
Page 8
Advertisement
Table of Contents
Need help?
Do you have a question about the 4-Port Print Server 1.3.1 and is the answer not in the manual?
Questions and answers