Keyspan 4-Port Print Server 1.3.1 User Manual page 46

Server IP Address Override:
This User Manual applies to the Keyspan 4-Port Print Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:4-Port Print Server - User Manual
use Device Force Disconnect if you are sure that the USB
printer is not in use. Please note that if your computers
automatically 'sleep' (aka 'hibernate', 'power save', etc.), USB
devices connected to the sleeping computer will be released
and made available to other users. Turning off your
computer will also release USB devices left in use
The Server IP Address Override command is used to 'force
configure' a 4-Port Print Server that is on your local network
but not shown in the Servers tab. This is common for 4-Port
Print Servers installed on Static IP based networks. When
you select this command, the Server IP Address Override
will open. In this window, enter the serial number of the 4-
Port Print Server (the last five digits of the Network Address
printed on the bottom of your 4-Port Print Server) and the IP
settings that you want to send to the 4-Port Print Server
Page 46