Keyspan 4-Port Print Server 1.3.1 User Manual page 42

Encode Session:
Active Discovery:
IP Address:
TCP Port:
Re-try timeout:
When you have finished entering your settings, click the OK button to save your changes or click
the Cancel button to discard your changes and return to the previous window.
If you have added a Server Access Settings record, the Server Access Settings shows the
following information:
This User Manual applies to the Keyspan 4-Port Print Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:4-Port Print Server - User Manual
Enabling this check box will encode your communication between the 4-
Port Print Server hardware and your computer. You only need to enable
this option in this window.
IMPORTANT NOTE: Encoding your communication with your 4-Port Print Server
will affect overall performance of your 4-Port Print Server and USB devices
connected to it.
If your 4-Port Print Server is outside of your network, ie in another
office, or if you need to access your 4-Port Print Server across a WAN,
enable Active Discovery. Active Discovery will search for 4-Port
Print Servers outside of your local network. Please note that active
discovery requires that you know the IP address, TCP port, and
password (if one has been setup) of the 4-Port Print Server that you
want to access.
If Active Discovery is enabled, enter the IP address of the 4-Port Print
Server that you want to connect to. This field is only available if Active
Discovery is turned on.
If Active Discovery is enabled, enter the TCP Port of the 4-Port Print
Server that you want to connect to. The default setting is 3842. This
field is only available if Active Discovery is turned on.
When Active Discovery is enabled, your computer will continually try
to connect to the specified 4-Port Print Server. The Re-try timeout
setting determine how long, in seconds, the 4-Port Print Server will try
to contact the specified 4-Port Print Server. The default setting is 15
seconds. This field is only available if Active Discovery is turned on.
NOTE: Re-try timeout is only available on the Mac version of the
Keyspan Server Utility.
Page 42