Installing The Keyspan Server Utility Software - Keyspan 4-Port Print Server 1.3.1 User Manual

Once the 4-Port Print Server has power, you will notice the 4-Port Print Server's status lights turn
on and off. After a few seconds, the lights will stop blinking. If the 4-Port Print Server is
responding properly, the four green USB lights will turn on and stay solid. You should also notice
that the first green SYSTEM light will blink on and off every few seconds. Ignore any other status
lights for now.
Tech Note: The LEDs on the 4-Port Print Server can also indicate other status such
as IP configuration type, server status, etc. For a detailed description of what the LED
lights indicate, please read the Status Light Behavior appendix in this manual.
TROUBLESHOOTING: You may see red lights on the server at this point in the installation.
This is normal until you install the Keyspan Server Utility software on at least one computer.
TROUBLESHOOTING: If you do not see the USB lights turn on and/or do not have a blinking
green SYSTEM light, please proceed to the Troubleshooting:Status Lights section in this
manual.
Keyspan 4-Port Print Server hardware installation is now complete. Please proceed to the Keyspan
Server Utility software installation instructions.

Installing the Keyspan Server Utility software

Tech Note: The following instructions outline the installation of the Keyspan Server
Utility software for both Mac and Windows operating systems. Where instructions are
different for one operating system, the difference will be noted. Although screen shots
of the Keyspan Server Utility software may not match to your operating system, please
This User Manual applies to the Keyspan 4-Port Print Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:4-Port Print Server - User Manual
Page 4