Using Auto-Connect Feature For Windows - Keyspan 4-Port Print Server 1.3.1 User Manual

computer (by using the Single-User Connect Mode)
The following subsections show you how to use these different features.
Using The Auto-Connect Feature For Windows
This feature will automatically connect and disconnect printers whenever you have a print job
queued. This gives you a richer printing experience that is similar to using a print servers. Note:
This feature is only enabled in the Multi-User Connect Mode for USB devices that are using the
Shared Share Mode.
MACINTOSH NOTE:
Auto-Connect feature for Windows is configured differently on Mac OS X systems. If
you are interested in using the Auto-Connect feature for Mac, please skip ahead to the
Using The Auto-Connect Feature For Mac subsection.
Before You Begin
Before you begin, please make sure that you have connected and installed your printer via the
Keyspan 4-Port Print Server's USB Devices tab (see the Using Your First USB Device sub
section earlier in the section).
To setup your printer for Auto-Connect, please follow these instructions:
Step 1
- Access The 4-Port Print Server System Tray Icon And Auto-Connect Settings
Right click the 4-Port Print Server icon in the System Tray.
When the sub-menu appears, select to Auto-Connect SETTINGS.
This User Manual applies to the Keyspan 4-Port Print Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:4-Port Print Server - User Manual
Page 14