Keyspan 4-Port Print Server 1.3.1 User Manual page 6

Tech Note: Server Names and Serial Numbers: Out of the box, your 4-Port
Print Server will show up as 'Unnamed'. You can change your 4-Port Print Server's
name in Servers tab. You will also notice a serial number listed next to your 4-Port
Print Server name. This serial number corresponds to the last five digits of your 4-Port
Print Server's MAC/Network address (printed on the bottom of your 4-Port Print Server
hardware).
Tech Note: About Firmware Updates: When you first launch the Keyspan
Server Utility software, you may get a message stating that there is new firmware
available for your 4-Port Print Server hardware. We recommend that you update your
firmware now. To do this, please follow the instructions on-screen instructions to
update your firmware. Once the update is complete, proceed to Step 5.
Tech Note: About Multiple Servers: If you have multiple unconfigured 4-Port
Print Servers on your local network, you can determine which server you are
configuring by looking at the serial number presented by the Keyspan Server Utility
application. This number correlates to the MAC/Network address that is printed on the
bottom of your 4-Port Print Server hardware.
TROUBLESHOOTING: If you do not see any 4-Port Print Servers in this window, please
proceed to the Troubleshooting:Network Issues section in this guide.
Step 5
-
Software Installation Complete!
Keyspan Server Utility software is now complete.
You may now proceed to the Using Your USB Devices On The network section in this guide.
This User Manual applies to the Keyspan 4-Port Print Server Software Version 1.3.x. Patent Pending.
Rev 2005jun23
Keyspan:4-Port Print Server - User Manual
Page 6