Tera Term Launch; Tera Term Configuration; Figure 13. Jumper To Remove On Stm32L562E-Dk Board; Figure 14. Tera Term Connection Screen - ST STM32CubeL5 User Manual

3.4.2

Tera Term launch

The Tera Term launch requires that the port is selected as COMxx: STMicroelectronics STLink Virtual COM port.
Figure hereafter illustrates an example based on the selection of port COM44.
3.4.3

Tera Term configuration

The Tera Term configuration is performed through the General and Serial port setup menus.
Figure hereafter illustrates the General setup and Serial port setup menus.
UM2745 - Rev 1
Figure 13. Jumper to remove on STM32L562E-DK board
Figure 14. Tera Term Connection screen
Tera Term connection preparation procedure
UM2745
page 17/36