Kamoer KXP100 Quick Start Manual page 4

NET F1: indicates that the device failed to connect to the router;
NET F2: indicates that the device successfully connected to the router, but failed to
connect to the cloud;
c.Running time display: press the knob, the device starts to work, the running time is
recorded at the bottom of the screen, and * is displayed on the right side of the time;
d.Flow rate display: the flow rate and speed of the device are running. When the
device is running, the flow rate and speed can be adjusted by adjusting the knob;
e.Rotation speed display: display the rotation speed of the device. When the device is
running, you can adjust the rotation speed by adjusting the knob.
 Automatic working mode
a.Working mode: the functional position of the display interface is automatic;
b.Network connection status display:
NET O: indicates that the network connection is normal, and the device can be
connected through the App at this time;
NET S: indicates that the device is in the state of network distribution, and the user
needs to complete the network configuration before it can connect to the network
normally;
NET F1: indicates that the device failed to connect to the router;
NET F2: indicates that the device successfully connected to the router, but failed to
connect to the cloud;
c.Start and stop display: press the knob, the device starts to work, at this time the
state is "start", press the knob again, the device stops working, and the state is "stop"
d.Running time: display the running time or volume of the device in the current
working mode;
e.Operation mode display: the operation mode of the equipment operation, "L & V" is
the volume circulation mode, "T & S" is the time circulation mode;
3