Other Functions; Overload Protection - OBH Nordica Ultrablend Boost LH985AS0 Instructions For Use Manual

Cold
Programs
400g of unsalted peanuts + 75g
Peanut
of slivered almonds + 125g of
butter
pecan nuts
8 x Ice cube 30x30x40 mm
Ice crush
250g vanilla ice cream +
Milk
1 banana (100g) + 250ml milk
shake
Manual functions
The manual functions can be used in addition to program mode.
• Clean: allows you to clean your appliance with 150 ml water and 1
drop washing up liquid. Press Clean button. The duration is 30 seconds.
• The longest working time cannot be more than 3 minutes.
• Blend: allows you to freely control the way you want to blend. Press
the blend button, the screen indicates « P » corresponding to the pulse
function but you can choose the blending speed from 1 to 9 by pressing
the setting +/- button (L). «H» is the maximum speed. Then press start/
stop button. You can set up the working time by pressing the setting +/-
button (L) between 5 seconds and 3 minutes. The remaining time appears
on the screen. Wait for the blender to stop automatically. The appliance
beeps 3 times.
Vacuum: Before using the vacuum function, lock the lid cap by rotating
•
it in such a way that the arrow on the lid cap is aligned with the «air out»
pictogram. Begin vacuum process. After 1min10s, you will be able to select
an automatic program (compatible with smoothie and milkshake programs).
At the end of the program, press the vacuum button in the middle of the lid
cap to remove the lid and pour your preparation.

OTHER FUNCTIONS

• Press the «Start/stop» button to pause the program. You can pause your
appliance up to 5 minutes, after which the appliance returns to the home
screen.
• If you keep pressing the «Start / Stop» button for 3 seconds, the appliance
beeps 3 times before going into «Stand by» mode. No more button lights
are visible except the «Start / Stop» button.

Overload protection

• The appliance is equipped with overload protection. This prevents the
motor from being damaged by overloading.
• If the appliance switches off during operation, proceed as follows:
- Switch the appliance off using the start/stop button, unplug and leave it
to cool down for approximately 15-20 minutes.
- Reconnect the appliance to the power supply and resume blending.
Cancel: You can stop the blending during the cycle by pressing the
•
«cancel» logo. The appliance stops and returns to the home screen.
Recipes Step by step
Select peanut butter program
Press Start/Stop button
Select ice crush program
Press Start/Stop button
Select milkshake program
Press Start/Stop button
Time
2min
15s
1min
1min
63