Location And Function Of Parts And Controls; Front - Sony Trinitron PVM-20M7MDE Instructions Manual

Location and Function of Parts and Controls

Front

1
Tally indicator
2
Speaker
3
Protector
handles
1
Tally indicator
Lights when the video equipment connected to this
monitor is selected. In order for this indicator to light
when the video equipment connected to this monitor is
selected, a tally control connection is needed on the
RS-232C connector. The light can also be turned on by
sending a command from the computer.
For detailed information, see "RS-232C connector (D-sub
9-pin)" in "Specification" on page 31, or refer to the
supplied interface manual.
2
Speaker
Provides monaural sounds.
3
Protector handles
Pull out or insert the monitor as holding these handles
when mounting the monitor in the EIA standard 19-
inch rack. These handles also function to protect the
control buttons and knobs on the front panel from
being broken when you tilts the monitor.
8
LINE RGB/COMPONENT
A B A B MENU
APERTURE BRIGHT CHROMA CONTRAST VOLUME POWER
E X I T
RESET
SELECT
– +
MIN MAX MIN MAX MIN MAX MIN MAX POWER
DEGAUSS UNDER REMOTE ENTER SAVING
SCAN
4
Front operation panel
Operation buttons, control knobs and indicators are
located on the front operation panel.
For detailed information on the operation panel, see "Front
Operation Panel" on the next page.
4
Front operation
panel