Sony Trinitron PVM-20M7MDE Instructions Manual page 11

Location and Function of Parts and Controls
3 LINE B connectors
Input connectors for the Y/C separate video and audio
signals and their loop-through output connectors.
To monitor the input signal fed through these
connectors, press the LINE B button on the front
panel.
Y/C IN (input) connector (4-pin mini-DIN)
Connect to the Y/C separate output connector of a
color video camera, VCR or other video equipment.
For pin assignments of the Y/C IN connector, see "Y/C IN
connector (4-pin mini-DIN)" on page 30.
Y/C OUT (output) connector (4-pin mini-DIN)
Loop-through output of the Y/C IN connector.
Connect to the Y/C separate input connector on a VCR
or another monitor.
When the cable is connected to this connector, the
75-ohm input termination is automatically released,
and the signal input to the Y/C IN connector is output
from this connector.
AUDIO IN (input) connector (phono jack)
Connect to the audio output connector on a VCR or
other equipment. For a loop-through connection,
connect to the audio output on another monitor.
AUDIO OUT (output) connector (phono jack)
Loop-through output of the AUDIO IN connector.
Connect to the audio input connector on a VCR or
another monitor.
4 RGB/COMPONENT A connectors
Input connectors for the R/G/B signals or component
signals, external sync signals and audio signals and
their loop-through output connectors.
To monitor the input signal fed through these
connectors, press the RGB/COMPONENT A button
on the front panel. Then, select one of the four items
RGB -EXT SYNC, RGB -SYNC ON G, COMP -EXT
SYNC or COMP -SYNC ON Y on the RGB SYSTEM
-RGB A- menu.
For detailed information on settings, see ""To select the
signal to be monitored through the RGB/COMPONENT
connectors" on page 22.
12
R/G/B IN or R-Y/Y/B-Y IN (input) connectors
(BNC-type)
When RGB -SYNC ON G or COMP -SYNC ON Y is
selected on the RGB SYSTEM -RGB A- menu, the
monitor operates on the sync signal from the G/Y
channel.
When RGB-EXT SYNC or COMP-EXT SYNC is
selected on the RGB SYSTEM -RGB A- menu, the
monitor operates on an external sync signal.
To monitor the analog RGB signal: Connect to the
analog RGB output connectors on a video camera,
VCR or other video equipment.
To monitor the component signal: Connect to the
R-Y/Y/B-Y component output connectors on video
equipment.
R/G/B OUT or R-Y/Y/B-Y OUT (output)
connectors (BNC-type)
Loop-through outputs of the R/R-Y, G/Y IN and B/
B-Y IN connectors.
When cables are connected to these connectors, the
75-ohm input termination is automatically released,
and the signal inputs to the R/R-Y, G/Y IN and B/B-Y
IN connectors are output from these connectors.
To output the analog RGB signal: Connect to the
analog RGB input connectors on a video printer or
another monitor.
To output the component signal: Connect to the R-
Y/Y/B-Y component input connectors on video
equipment.
AUDIO IN (input) connector (phono jack)
Connect to the audio output connectors on video
equipment when the analog RGB or component signal
is input.
AUDIO OUT (output) connector (phono jack)
Loop-through output of the AUDIO IN connector.
Connect to the audio input connector on a VCR or
another monitor.
EXT SYNC IN (external sync input) connector
(BNC-type)
Connect to the sync signal output on a video camera,
VCR or other video equipment, when this monitor
operates on an external sync signal.
To use the sync signal fed through this connector,
select RGB -EXT SYNC or COMP -EXT SYNC on
the RGB SYSTEM -RGB A- menu.