Rear Panel - Sony Trinitron PVM-20M7MDE Instructions Manual

Rear Panel

1
⁄AC IN connector
AC IN
7
1/YGround terminal
Note
Before connecting the video equipment, see "Important safeguards/
notices for use in the medical environments" on page 2.
1 ⁄AC IN (inlet) connector
Connect the supplied AC power cord to this connector
and to a wall outlet.
2 LINE A connectors
Input connectors for the composite video and audio
signals and their loop-through output connectors.
To monitor the input signal fed to these connectors,
press the LINE A button on the front panel.
VIDEO IN (input) connector (BNC-type)
Connect to the video output connector on video
equipment, such as a VCR or a color video camera.
For a loop-through connection, connect to the video
output connector on another monitor.
2
LINE A connectors
LINE A
VIDEO AUDIO
IN IN
OUT OUT
R/R–Y G/Y
A
IN OUT IN
B R/R–Y G/Y B/B–Y AUDIO
IN IN IN
RGB/COMPONENT
6
RGB/COMPONENT B connectors
3
LINE B connectors
LINE B
Y/C
IN IN
OUT
B/B–Y AUDIO
OUT IN OUT IN OUT
EXT SYNC
RS-232C
IN IN
REMOTE
5
REMOTE connector RS-232C
(The
VIDEO OUT (output) connector (BNC-type)
Loop-through output connector of the VIDEO IN
connector. Connect to the video input connector on a
VCR or another monitor.
When the cable is connected to this connector, the
75-ohm input termination is automatically released,
and the signal input to the VIDEO IN connector is
output from this connector.
AUDIO IN (input) connector (phono jack)
Connect to the audio output connector on a VCR or
other equipment. For a loop-through connection,
connect to the audio output on another monitor.
AUDIO OUT (output) connector (phono jack)
Loop-through output on the AUDIO IN connector.
Connect to the audio input connector of a VCR or
another monitor.
4
RGB/COMPONENT A
connectors
AUDIO
OUT
EXT SYNC
IN OUT
mark indicates automatic termination.)
11