Active Settings And Menu Tags; Temporary Settings - madVR Labs Envy User Manual

3.3 Active Settings and Menu Tags

The Active Settings reflect the current settings in use by Envy. Let's look again at the Upscaling &
Sharpening settings, except this time, with the Active Settings option selected in the Profile Bar.
Comparing this to the same menu page as shown in Section 3.1, there are two key differences.
First, Active Settings is selected in the Profile Bar instead of Base Settings. Therefore, the menu
settings shown here are for the settings that are currently active, after any activated profiles and
any temporary settings have been applied.
Second, notice the BASE tag next to each menu setting. In general, menu tags indicate where
each setting gets its value from. In this case, BASE indicates that the setting is inherited from the
Base Settings and is not currently being overridden by any profiles or temporary settings. Base
tags appear only when viewing Active Settings. Other menu tags are TEMP, PROF, SET and THRU.
We discuss these tags in further examples below, starting with how temporary settings are
handled.
3.4

Temporary Settings

Envy makes it easy to temporarily change your settings, without fear of losing your preferred and
trusted settings, or fouling something up. Temporary settings are especially useful for changing
something just for the current movie, or for experimenting with available options.
9
madVR Envy – Profile User Guide
Copyright © madVR Labs, LLC. All rights reserved.