Download
Share
Print this page
madVR Labs Envy Sony Setup Manual
  1. Manuals
  2. Brands
  3. madVR Labs Manuals
  4. Media Converter
  5. Envy
  6. Sony setup manual

madVR Labs Envy Sony Setup Manual

Hide thumbs Also See for Envy:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
madVR Envy
Sony Setup Guide
www.madvyenvy.com
Revision 1.0
madVR Envy – Sony Setup Guide
Copyright © madVR Labs, LLC. All rights reserved.

Advertisement

loading

Related Manuals for madVR Labs Envy

Summary of Contents for madVR Labs Envy

  • Page 1 Envy Sony Setup Guide www.madvyenvy.com Revision 1.0 madVR Envy – Sony Setup Guide Copyright © madVR Labs, LLC. All rights reserved.
  • Page 2 Introduction Welcome to the Envy Sony Setup Guide. Although setting up the Envy itself is often as simple as plugging in the HDMI cables and entering the projector’s peak brightness, it is important that your projector be set optimally for use in conjunction with the Envy. This guide covers the recommended set up for Sony projectors when used with Envy.
  • Page 3 2. Assuming you changed the Color Space from RGB to YCbCr in step 1B above, go to the Envy HDMI Configuration menu (press the Envy menu button, then press the right arrow button four times) and set the Slow YCbCr Handshake option to On. This optimizes the HDMI handshake with the Sony.
  • Page 4 Envy Scope Screen Setup Guide, available from www.madvrenvy.com/#downloads. 5. ALL other settings in the various Envy Configuration Menus should be left on AUTO, unless you have a particularly good and specific reason to change it. Often people change these settings without understanding the fully impact.
  • Page 5 8. Sony Contrast Enhance - We recommend turning this off, but it can be used in moderation if preferred, but be sure to check it with Envy's Contrast Recovery function while Envy is doing Tone Mapping with 4K HDR. 9. Please follow these three steps to ensure the Sony switches color spaces properly based on whether the incoming signal is using the BT709 or BT2020 color space.
  • Page 6 “sanity check” to help ensure everything is set up optimally: A. Play any 4K HDR movie (except Gemini Man or Billy Lynn). Check the Envy Incoming Signal Menu (press OK on the Envy remote when no Envy menu is active) and make sure that the “Framerate”...

  • Page 7: Additional Resources

    C. While on the Envy Incoming Signal menu, press the right arrow once to access the Outgoing Signal Information. Make sure that the “Framerate” shown here matches the “Framerate” from the Incoming Signal Information menu (in this example, both should show 23.976).