Download
Share
Print this page
  1. Manuals
  2. Brands
  3. madVR Labs Manuals
  4. Media Converter
  5. Envy
  6. Setup manual

madVR Labs Envy Setup Manual

For the epson ls12000 projector
Hide thumbs Also See for Envy:
1
2
3
4
5
6
7

Advertisement

Quick Links

Download this manual
madVR Envy
Epson Setup Guide
LS12000
www.madvyenvy.com
Rev 1.04
madVR Envy – Epson Setup Guide
Copyright © madVR Labs, LLC. All rights reserved.

Advertisement

loading
Need help?

Need help?

Do you have a question about the Envy and is the answer not in the manual?

Questions and answers

Subscribe to Our Youtube Channel

Related Manuals for madVR Labs Envy

Summary of Contents for madVR Labs Envy

  • Page 1 Envy Epson Setup Guide LS12000 www.madvyenvy.com Rev 1.04 madVR Envy – Epson Setup Guide Copyright © madVR Labs, LLC. All rights reserved.
  • Page 2 Welcome to the madVR Envy Setup Guide for the Epson LS12000 projector. Although setting up the Envy itself is straight forward, it is important that your Epson projector be set optimally for use in conjunction with the Envy. This guide covers the recommended set up for Epson projectors when used with Envy.
  • Page 3 Epson. Therefore, we recommend setting the Gamma Correction value to -2 in the Epson, which typically results in a 2.4 effective gamma. And setting the Envy Transfer function to 2.4. You can access the Gamma Correction setting in the Epson from the main “Image”...
  • Page 4 To save these changes to the Base Configuration, highlight either of the values that shows an orange TEMP tag and press the Green button on the Envy remote. If you have made the changes with Base Configuration already selected at the bottom of the menu, then this step is not necessary.
  • Page 5 Note that changing the “Configuration” items should not be confused with the changing the Envy Settings Menu (the Envy remote control button with the 3 sliders on it) – those are there for you to change the image to suit your tastes.
  • Page 6 A. Play any 4K HDR movie (except Gemini Man or Billy Lynn). Check the Envy Incoming Signal Menu (press OK on the Envy remote when no Envy menu is active) and make sure that the “Framerate” shows 23.976. If instead it shows 59.94, and you are using an Apple TV or Kaleidescape, then your source device(s) are not set up for proper playback –...

  • Page 7: Additional Resources

    B. While playing the 4K HDR movie, check the Envy Incoming Signal Information to make sure the “Transfer Function” shows “HDR”. If not, Envy is not receiving HDR from the source player. This could be caused by a “rogue” device in the HDMI chain, or if using an AVR like the Denon/Marantz, make sure it is set to use “Enhanced”...