Page 4
8. Press OK to apply the settings. 9. Open the Envy “Black Bar Configuration” menu (press the menu button on the Envy remote, then press the right arrow 3 times). Highlight “Active Configuration” are the bottom of the menu. Press right arrow one time, so that it changes to “Base Configuration”.
Page 5
10. If you are using a scope screen and have not previously set up the Screen Boundaries option in your Envy, you must in order for Envy to show the Kaleidescape menus at full screen. To do so, go to the Envy “Screen Configuration” menu and under “Screen Boundaries”, choose “Run Assistant”.