Saving To The Base Settings; Saving To A Profile - madVR Labs Envy User Manual

3.5.1 Saving to the Base Settings

If you want to save your temporary settings so that they become the new system defaults, you
can save them directly to the Base Settings. Press the Green button on the Envy remote while
any temporary menu setting is highlighted.
In the image in Section 3.4, you can see that the Image Upscaling setting is highlighted and tagged
as TEMP. Therefore, pressing the Green button while on this line will save this new setting of
"Anti-Alias" to the Base Settings.
Tip: The Context Sensitive Help window provides a nice summary of what colored buttons are
available and what actions pressing that button will take. This varies depending on the context
of the menu.
Another way to update the Base Settings, without making the change in the Active Settings, is to
select "Base Settings" in the profile bar, and then make the changes directly in the Base Settings.
This approach is reviewed in Section 4.0. In practice you will usually make the changes directly in
the Active Settings and then use the Save to Base option, but either approach will work.

3.5.2 Saving to a Profile

Temporary settings can also be saved to a profile, so that they are used only when that profile is
activated, and not as default settings as we did above.
For example, assume you experiment with the Anti-Aliasing option and find you prefer it over the
Sharp option, but only for resolutions of 1080p and below. Wouldn't it be great if your Envy would
automatically use your preferred Anti-Alias setting whenever the resolution was 1080p or below?
Let's give that a try.
First, press the Yellow button when the "Image Upscaling" menu item is highlighted, since it
contains the temporary setting we wish to save. This will prompt you to select the profile you
want to save all temporary settings in this menu page to, as shown below. Select 1080p or lower.
Now whenever the content is 1080p or lower, Envy will automatically activate this profile and
use the Anti-Alias setting. Otherwise, the Sharp setting will be inherited from the Base Settings.
11
madVR Envy – Profile User Guide
Copyright © madVR Labs, LLC. All rights reserved.